Skip to content
Genuine Somfy Motors & Parts for Roller Shades

Replace a Simu T5 or DMI5 motor, or build a new shade or awning.

Replacing? Your fabric stays on the tube. Building new? Every part below is Somfy-matched to part 2000771.

Somfy Simu DMI5 35Nm 18rpm 120V (2000771)
Motor headMounts to the bracket at the motor end.
CableCarries power to the motor.
Drive endTurns the tube.
123
  1. 1
    Motor head Mounts to the bracket at the motor end.
  2. 2
    Cable Carries power to the motor.
  3. 3
    Drive end Turns the tube.
Simu DMI5 35Nm 18rpm 120V, part 2000771. 35.0 Nm at 18 rpm.

Replacing a motor

  1. 1

    Cut power, take it down

    Turn off the circuit and support the roller before you remove it.

  2. 2

    Pull the old motor

    Slide it out of the tube and take off its crown and drive.

  3. 3

    Fit crown and drive

    Fit the T5 crown and drive for your tube, then slide the new motor in.

  4. 4

    Wire and set limits

    Connect the 4 wires to your up/down switch, then set the limits.

Not sure of your tube size or head type? Send us a photo of the label on your old motor. We'll confirm the part before you order. Ask us

Building something new

  1. 1

    Measure the tube

    Measure across the outside of the tube end and note its shape. That sets the crown and drive.

  2. 2

    Pick the parts

    Add the crown and drive, the motor bracket and a remote or switch from the list below.

  3. 3

    Mount and fit

    Fit the crown and drive, slide the motor into the tube and seat the head in its bracket.

  4. 4

    Wire and set limits

    Connect the 4 wires to your up/down switch, then set the limits.

Planning a new shade or awning? Send us the size and tube. We'll build the parts list with you. Ask us

Find your crown, drive and bracket.

1Measure the tube end, outside edge to outside edge.

If a row lists a wall thickness, match that too.

2Pick the bracket that matches how your shade mounts.

Every bracket here fits this motor's head.

Not sure? Send us a photo of the tube end and the motor end. Ask us

What the Simu DMI5 35Nm 18rpm 120V needs to run

Somfy lists every part below as compatible with part 2000771. Pick one from each row.

1Tube fit

Match the crown and drive to your tube size and profile.

Somfy T5/T6 60mm Round Aluminum Drive (9012950)
T5/T6 60mm Round Aluminum Drive Part 9012950 $14.25
$14.25
Somfy T5/T6 70mm Octagonal Aluminum Drive (9011878) $15.25
Somfy Simu T5/T6 85mm Round (Simbac Tube) Drive (9420300)
Simu T5/T6 85mm Round Part 9420300 $15.81
$15.81
See all crowns and drives

2Mounting

Holds the motor head and the idle end in place.

3Also fits

Other parts Somfy lists with this product.

Somfy Drive Stop and Screw (9910004)
Drive Stop and Screw Part 9910004 $3.50
$3.50

Somfy backs the Simu DMI5 35Nm 18rpm 120V for 5 years. We handle the claim.

5years

Somfy warranty on the Simu DMI5 35Nm 18rpm 120V, part 2000771.

What Somfy covers
Defects in materials and workmanship, for 5 years from purchase.
If it fails
Email us your order number. We arrange the replacement with Somfy.
Where it comes from
ShadeMotorsDirect is an authorized Somfy distributor. You get the US version, new in Somfy packaging.
Returns
Unopened items in original packaging. Ask us for an RA number before you ship.
Questions
Call or chat, 8:00 AM - 7:30 PM ET.