Skip to content
Genuine Somfy Motors & Parts for Roller Shades
Buying Guide

Somfy Curtain Motor Control by Remote, Wall Switch or Dry Contact

Short answer: A Somfy curtain motor takes commands one of four ways, and the version you order sets which. Glydea ULTRA RTS motors pair with Somfy RTS remotes and wireless wall switches. Glydea ULTRA DCT motors take dry contact wiring from a switch or a control system. The Glydea ULTRA 50 WireFree runs on Zigbee, and the no-plug wired versions use AC switching.

Pick the control type before the motor

Somfy builds the Glydea ULTRA 35 and ULTRA 60 on one platform and sells each in separate control versions. The number in the name tracks the drapery weight in kilograms, so the ULTRA 60 handles the heavier panel. Both run at 105 rpm with soft start, soft stop and automatic limits on the end stops.

The control version is a factory choice. Order the one that matches the controls already in the room, then add parts. Plug-in modules extend some versions later, and the table shows which.

RTS radio Glydea ULTRA 35 RTS (1246116), Glydea ULTRA 60 RTS (1246118) and the battery Irismo 45 WireFree RTS (1002353). Controlled by Situo, Telis and DecoFlex RTS controls or a TaHoma Switch.
Dry contact (DCT) Glydea ULTRA 35 DCT (1246115) and Glydea ULTRA 60 DCT (1246117). Controlled by a dry contact switch or relay outputs through an RJ12 socket.
Zigbee 3.0 Glydea ULTRA 50 WireFree Zigbee (1246594), or a DCT motor fitted with the Zigbee module. Controlled by a TaHoma Switch or Zigbee remotes.
SDN (RS485) Glydea ULTRA motors fitted with the SDN RS485 module, for commercial networks.
AC switching (wired) Glydea ULTRA 35 and 60 wired motors with a 5 ft cable and no plug, for line-voltage switching an electrician wires.

RTS remotes and wireless switches for Glydea ULTRA RTS

The RTS versions ship with a 10 ft cable and a molded NEMA plug, so an outlet near the track head powers the motor and the radio does the rest. Each motor stores up to 12 RTS transmitters and reaches up to 656.2 ft in open field. The Glydea ULTRA 60 RTS runs at 38 dB.

A Somfy Situo 5 Channel RTS Pure Remote (1870575) gives one channel per curtain plus a group channel, which suits a living room with several panels. Somfy records a new control point when the installer presses PROG on the back of a paired remote until the curtain moves. The first remote and the limits come from the motor's own setup sequence, covered in the guide to pairing a Somfy RTS remote and in the motor's install guide in our Somfy spec library.

Glydea ULTRA also supports Touch Motion. A tug on the fabric starts the motor, and Somfy offers two sensitivity settings plus an off position. The battery Irismo 45 WireFree uses the same RTS remotes and suits a track with no outlet in reach.

Dry contact wiring for Glydea ULTRA DCT

A DCT motor takes its commands through an RJ12 socket on the motor head. Somfy accepts two normally open contacts for open and close, or three for open, stop and close. The motor supplies the voltage on the control line, so the switch or relay only closes a contact. Somfy's drapery data lists individual, group and master control for the DCT versions.

Somfy Dry Contact Open Close Stop wall switch 1800219 for wiring a Glydea ULTRA DCT curtain motor

For a wall control, the Somfy Dry Contact Open, Close, Stop Wall Switch (1800219) is a Decora-style switch built for Somfy DCT motors. For a control system, relay outputs take its place. Somfy publishes a wiring detail on its Glydea ULTRA 60 DCT page for connecting the motor to a Lutron QSE-IO interface, which helps integrators on mixed-brand jobs.

Somfy names the Somfy DCT Setting Tool (9014599) for adjusting end limits and direction on Glydea ULTRA DCT motors. Plug it into the RJ12 socket during setup, then reconnect the switch line.

Zigbee: the WireFree ULTRA 50 or a plug-in module

The Glydea ULTRA 50 WireFree Zigbee (1246594) carries 110 lb (50 kg) on a rechargeable battery and talks Zigbee 3.0 in both directions. It pairs with the Somfy TaHoma Switch (1871037), which adds app control, schedules and voice assistants. RTS remotes do not control a Zigbee motor, so plan the remotes and the hub together.

A powered DCT motor gains Zigbee through Somfy's Zigbee (2-Way) Module (9000043), which Somfy pairs with the Glydea ULTRA 35 DCT and 60 DCT. That route keeps the hard-wired switch and adds the app on top.

SDN and wired AC versions for building systems

Commercial projects on the Somfy Digital Network use the Somfy SDN RS485 Module for Glydea ULTRA (1871412). It fits into the motor head and draws power from the motor, and the installer configures it with Somfy's SDN motor configuration software.

The Glydea ULTRA 60 Wired Motor, No Plug (1003160) and its 35 sibling ship with a 5 ft cable and no plug. Somfy designs them for AC switching, so a licensed electrician terminates them into a junction box and wires the switch or relay at line voltage.

Order checklist for a Somfy curtain motor

Start with power at the track head. An outlet points to the RTS or DCT plug-in versions, a junction box points to the wired motor, and no power points to a battery motor. Next, match the control path in the table to the controls in the house. Finish with weight and hardware: weigh the drapery, then pick the ULTRA 35 or ULTRA 60 and the track parts that go with it.

The Glydea ULTRA 35 vs 60 vs 50 guide covers weight and track length, and the curtain motor parts list covers carriers, brackets and arms. Browse the full range in our Somfy drapery and curtain motors collection, or call 859-414-6872 from 8:00 AM to 7:30 PM ET to confirm a control plan before you order.

Somfy curtain motor control FAQ

Can a regular light switch run a Somfy curtain motor?

A standard light switch does not suit the plug-in versions. The Glydea ULTRA DCT needs a dry contact switch such as the Somfy 1800219, which closes a low-voltage contact the motor supplies. The no-plug wired Glydea ULTRA motors take AC switching, which an electrician wires at line voltage with a switch or relay rated for the motor.

Can a Somfy RTS remote control the Glydea ULTRA 50 WireFree?

No. The Glydea ULTRA 50 WireFree uses Zigbee 3.0, and RTS remotes speak a different radio protocol. Pair it with a Somfy TaHoma Switch or a Somfy Zigbee remote. A TaHoma Switch also controls RTS motors, so one hub can run an RTS curtain in one room and a Zigbee curtain in another.

Does a Glydea ULTRA curtain motor work with Alexa or Google Home?

Yes, through a Somfy TaHoma Switch. The hub controls Glydea ULTRA RTS motors and Zigbee motors such as the ULTRA 50 WireFree, then links to voice assistants through the TaHoma app. A DCT motor joins the same setup after you fit Somfy's Zigbee (2-Way) Module 9000043.

Can I still open the curtain by hand?

Yes. Glydea ULTRA motors support manual operation and Touch Motion, so a gentle pull on the leading edge starts the motor in that direction. Somfy ships Touch Motion at high sensitivity and offers a low setting or off. Change the setting through the sequence in the motor's install guide.

Sources: Somfy Drapery Databook (June 2026), Somfy Glydea ULTRA 35 and 60 Technical Specifications (D-0141), Somfy Glydea ULTRA RTS and DCT instructions, Somfy SDN RS485 Module for Glydea ULTRA guide, and somfysystems.com product pages for 1246118, 1003158 and 1800219.

Shade Motors Direct is an authorized source for genuine Somfy motorized window shade, blind, and drapery parts.

Previous Post Next Post

Leave A Comment

Please note, comments need to be approved before they are published.

Welcome to our store
Welcome to our store
Welcome to our store