Short answer: Pick the Somfy Situo 1 RTS Pure (1870571) for one shade or one group, and the Situo 5 RTS Pure (1870575) for up to five channels. Step up to the Situo 5 Variation (1811612) if you need a scroll wheel for blind tilt or RTS LED lights, or to the Situo 5 Soliris (1870579) if a Somfy sun sensor runs your shades.
Situo is Somfy's slim handheld RTS remote line. Each version speaks RTS at 433.420 MHz, carries the Somfy "my" button and ships with a wall holder. The versions split on two questions: how many channels you need, and whether you need tilt control or sun control on top of up, down and my.
The four Situo remotes we carry
The four come in Somfy's Pure white finish and work with any Somfy RTS motor or receiver. Prices below are our live store prices.
| Remote | Channels | Extra control | Battery | Price |
| Situo 1 RTS Pure II (1870571) | 1 | Up, down, my | CR2032 | $77.95 |
| Situo 5 RTS Pure II (1870575) | 5 | Up, down, my | CR2032 | $96.95 |
| Situo 5 Variation RTS Pure II (1811612) | 5 | Scroll wheel for slat tilt, sheer vanes and RTS LED lights | CR2430 | $119.67 |
| Situo 5 Soliris RTS Pure II (1870579) | 5 | Activates the sun sensor function | CR2032 | $95.25 |
Somfy rates the Situo RTS II remotes to operate reliably at 20 ft and up to 65 ft in optimal conditions. RTS is omni-directional, so you can point the remote anywhere in the room.
Situo 1 or Situo 5: count your channels
A Situo channel controls one motorized product or one group of products. The Situo 1 has a single channel. Pair it to one shade, or pair it to three shades at once and it moves all three together as a group.
The Situo 5 adds a channel selector button and four indicator lights. Lights 1 to 4 show channels 1 to 4. Somfy shows channel 5 with all four lights on. A common layout puts each window on channels 1 to 4 and the room as one group on channel 5, so one press drops the lot.
Count the shades and groups you want to run from one spot. One or two products in a bedroom suit a Situo 1. A living room with four windows plus an "all" group needs the Situo 5. Past five channels, a Telis 16 or a hub makes more sense, and our Somfy remote comparison covers those steps up.
Situo 5 Variation for tilt blinds and LED lights
The Situo 5 Variation RTS Pure II (1811612) keeps the five channels and the my button, then adds a scroll wheel. Somfy built the wheel to tilt blind slats and sheer vanes in small steps, and to adjust RTS LED lights. Up and down buttons still run the full travel.
Two products in our catalog show where the wheel earns its price. The Somfy Tilt 50 WireFree Through-Shaft RTS (1240276) motorizes the tilt rod of a horizontal blind, and the wheel lets you set the slat angle by feel. The Somfy LED RTS 24V DC Receiver (1870872) drives dimmable 24V LED strips on pergolas and awnings, and the wheel sets the brightness.
For roller shades and draperies with no tilt or lights, the standard Situo 5 does the same job for less.
Situo 5 Soliris for sun-sensor control
The Situo 5 Soliris RTS Pure II (1870579) is a five-channel Situo with sun control built in. Somfy designed it to activate the sun sensor function, so a Somfy RTS sun sensor can lower and raise your shades or awning by sun intensity and cut heat gain.
The remote needs a sensor to work with. Two RTS sensors in our catalog fit the job:
- The Somfy Sunis WireFree RTS Sun Sensor (9020412), a battery sun sensor with no wiring run.
- The Somfy Soliris RTS Sun and Wind Sensor 24V DC Kit (9012500), a wired sun and wind sensor for awnings, with the transformer included.
Without a sensor, the Soliris works as a plain five-channel Situo. If you plan to add a sun sensor later, starting with the Soliris saves you a second remote.
Setting up a Situo: pairing, channels and the my button
Somfy's Situo 1 and 5 RTS instructions have you add a new Situo through a remote that already works the shade. To add or remove a Situo:
- On the remote already paired with the shade, press and hold the PROG button until the shade moves up and down. The button sits recessed, so a paperclip helps.
- On a Situo 5, press the channel selector until the indicator lights show the channel you want.
- Briefly press PROG on the new Situo. The shade moves up and down to confirm the pairing. The same sequence deletes the Situo.
If no working remote exists, the motor needs a fresh pairing, and our guide to pairing, adding and deleting a Somfy RTS remote walks through it. Steps differ by motor generation, so keep your motor's install guide from the Somfy spec library at hand.
To save a favorite position with the my button:
- Move the shade to the position you want.
- Press and hold my for about 5 seconds to set the favorite position.
A short press of my stops a moving shade. To delete the favorite, press my to send the shade there, then hold my for about 5 seconds.
Batteries, wall holders and spare parts
The Situo 1, Situo 5 and Situo 5 Soliris run on one 3V CR2032 lithium cell. The Situo 5 Variation takes a CR2430, and Somfy rates it for 5 years of autonomy. On the Pure remotes, Somfy has you remove the rear panel with a Phillips screwdriver, swap the cell and refit the panel.
Each Situo ships with a wall holder. Peel the film, press the holder onto a flat, clean, dry surface, then hang the remote. If a holder goes missing, the Somfy Situo II RTS Mounting Bracket (9028048) replaces it for a few dollars.
Somfy backs each Situo with a 5-year warranty. You can compare the rest of the lineup in our Somfy RTS remotes collection, or call us at 859-414-6872 with your motor's part number.
Situo remote FAQ
Does a Situo remote work with a Somfy Zigbee motor?
No. Each Situo in this guide transmits RTS at 433.420 MHz, and Somfy Zigbee motors listen on Zigbee 3.0 instead. A Zigbee motor pairs with a Somfy Ysia Zigbee remote or a TaHoma Switch. Check the motor label or product name for RTS before you order a Situo, since an RTS remote will not pair with a wired or Zigbee head.
Can one Situo 5 run more than five shades?
Yes, through groups. Each of the five channels controls one product or one group, and you can pair several shades to the same channel so they move together. A room with eight shades can use four channels for pairs and channel 5 for the whole room. Past five separate zones, a Telis 16 or a TaHoma hub fits better.
Will the Variation scroll wheel move a roller shade?
Somfy lists the Situo 5 Variation scroll wheel for tilting blind slats and sheer vanes, and for adjusting RTS LED lights. Roller shades and draperies run on the up, down and my buttons, which each Situo has. If your windows hold only roller shades, the standard Situo 5 RTS Pure (1870575) covers them at a lower price.
Which battery does a Somfy Situo remote take?
The Situo 1 RTS Pure, Situo 5 RTS Pure and Situo 5 Soliris each take one 3V CR2032 lithium cell. The Situo 5 Variation takes one CR2430, rated by Somfy for 5 years of autonomy. On the Pure models, remove the rear panel with a Phillips screwdriver, swap the cell and refit the panel.
Sources: Somfy Situo RTS II spec sheet; Somfy Situo 1 and 5 RTS consumer instructions; somfysystems.com product pages for 1870571, 1870575, 1870579 and 1811612.
Shade Motors Direct is an authorized source for genuine Somfy motorized window shade, blind, and drapery parts.


