Skip to content
Genuine Somfy Motors & Parts for Roller Shades
50mm Motors

Somfy Maestria 535A2 RTS 35Nm Zip Screen Motor Fit Guide

Somfy Maestria 535A2 RTS 120V motor, 35 Nm at 20 rpm for exterior zip screens

Zip screen systems run on tension. Fabric tracks down both sides of the opening, the tube carries the roll, and the motor pulls against that side-track drag on every inch of travel. Torque counts for more here than on an interior shade of the same width. The Somfy Maestria 535A2 RTS holds the 35 Nm step in the Maestria range, which covers the wide patio and lanai screens that a 25 Nm motor leaves working at its ceiling.

The 35 Nm step in the Maestria RTS range

Somfy builds Maestria RTS on the 50 mm tubular platform and aims it at exterior screens. The range climbs in torque steps, and installers match the step to screen area plus the friction the side tracks add. Ref 1134084 occupies the 35 Nm step at 20 rpm, and Somfy codes it 535A2 MAESTRIA+ 50RTS SJTW10FT on its product reference. The 525A2 at 25 Nm suits narrower openings. Above this motor, the 550R2 reaches 50 Nm and trades travel speed for pull.

Order the 535A2 when a 25 Nm motor sits close to its limit and the job still wants 20 rpm travel. Somfy publishes 35 Nm for this reference, near 310 in-lb at the tube.

Screens this motor drives

Maestria motors live inside the headbox of a screen system. The screen manufacturer supplies the tube, the crown and drive, and the mounting, and the motor slides into that assembly. Somfy designed the platform around exterior fabric that has to hold position in wind and sun.

  • Exterior zip screens on patios, lanais and outdoor kitchens
  • Retractable solar screens over glass walls and sliding doors
  • Screen enclosures on pergolas and covered terraces
  • Commercial storefront and restaurant patio screens
  • Wide residential openings where a 25 Nm motor reaches its ceiling
  • Replacement of an older Maestria RTS motor of the same torque step

Somfy rates the motor IP 44 and lists a working range of -4 F to 158 F, so it tolerates the heat and weather an exterior headbox sees through a full year.

Verified specs for ref 1134084

Specification Published figure
Somfy reference 1134084, 535A2 MAESTRIA+ 50RTS SJTW10FT
Torque 35 Nm
Speed 20 rpm
Power supply 120V / 60 Hz AC
Voltage range 108 V to 132 V
Rated current 2.1 A
Standby consumption 0 W
Minimum tube inside diameter 1.85 in
External diameter 1.77 in
Overall length 26.89 in
Motor head Star
Control RTS, 433.420 MHz
Range in open field 656.2 ft
Limit switch Electronic, 250-turn capacity
Cable SJTW, 3 wire, white, 9.84 ft
Protection index IP 44
Insulation class Class I
Working temperature -4 F to 158 F
Thermal tripping 284 F
Warranty 5 years

Tube fit, star head and clearance

Two numbers settle whether this motor drops into a screen system. The motor body measures 1.77 in across, and Somfy sets the minimum tube inside diameter at 1.85 in. Measure the inside of the tube, not the outside. A tube that reads under 1.85 in will bind on the motor body once the crown and drive take up their own space.

Length matters at the other end. Somfy publishes 26.89 in unwrapped for ref 1134084, measured from the head face to the drive end. Lay that against the clear span inside the headbox, then add the bracket depth and the idler end. Screen headboxes run tight, and a quarter inch of missing span turns into a return.

The 535A2 RTS carries a star head. Mounting hardware and the crown and drive pair come from the screen system rather than from the motor side, since each manufacturer cuts its own tube profile and bracket plate. Confirm both with the screen maker before the motor ships. For a general picture of how Somfy heads, crowns and drives relate, the crowns and drives guide walks through the parts.

RTS control, remotes and wall switches

RTS puts the radio inside the motor head. Three wires feed the motor, and no control wiring runs back from a switch, which keeps a retrofit inside an existing headbox short. Somfy runs RTS at 433.420 MHz and publishes 656.2 ft of open-field range, enough to reach a patio motor from a remote inside the house.

Pair a handheld for a single screen, a wall switch for a fixed location, or both on the same motor. The Situo 1 Channel RTS remote drives one motor and suits a single-screen patio. The DecoFlex 1 Channel RTS wall switch in white mounts in a standard box or sticks to glass, since it runs on its own battery and needs no wiring. For a terrace with several screens, the DecoFlex 5 Channel RTS wall switch addresses each motor separately plus a group, and the same switch in black matches darker trim.

Somfy gives the 535A2 RTS electronic limits with 250 turns of capacity, so a long screen drop sets without a mechanical limit ring. Weather sensors and a Somfy hub join the same RTS network later, which lets a wind sensor retract the screens on their own.

Ordering the 535A2 RTS

The Somfy Maestria 50 RTS 535A2 120V motor ships as the motor with its 9.84 ft SJTW lead and no crown or drive, since those follow the tube. Check three points before you order: the tube inside diameter against 1.85 in, the clear headbox span against 26.89 in, and the torque step against the screen area the manufacturer specifies.

Somfy backs the motor for 5 years. Insulation sits at Class I, which calls for a ground at the supply, and the lead carries three conductors in a white SJTW jacket. Add a remote or a wall switch at the same time, because an RTS motor needs a transmitter to set its limits during commissioning.

Frequently asked questions

What tube size does the Maestria 535A2 RTS need?

Somfy sets the minimum tube inside diameter at 1.85 in for ref 1134084. The motor body measures 1.77 in across. Measure the inside of the tube rather than the outside, and remember that the crown and drive take up their own length at each end of the tube.

How much does 35 Nm cover on a zip screen?

Torque capacity depends on fabric weight, drop and the drag the side tracks add, so the screen manufacturer sets the area limit for a given motor. The 535A2 sits a step above the 25 Nm 525A2, which gives it room on wide patio and lanai openings.

Does this motor need control wiring to a switch?

No. RTS carries the commands by radio at 433.420 MHz, so the three-wire lead handles power alone. Somfy publishes 656.2 ft of open-field range. A DecoFlex wall switch runs on its own battery and needs no wiring behind it.

Which remote sets the limits on a new install?

Any paired RTS transmitter sets them. A Situo 1 Channel remote works for a single screen, and a DecoFlex wall switch works the same way. Pair the transmitter first, then run the limit sequence, since the electronic limit unit takes its instructions over the radio link.

Somfy DecoFlex 5 Channel RTS WireFree wall switch in white for Maestria RTS motors

Shade Motors Direct is an authorized source for genuine Somfy motorized window shade, blind, and drapery parts.

Leave A Comment

Please note, comments need to be approved before they are published.

Welcome to our store
Welcome to our store
Welcome to our store