A cassette awning hides the roller tube, the motor and the fabric inside one extruded housing. That housing sets the terms. Tube diameter, bracket depth and head shape all come from the cassette, and the motor has to land inside it without fouling the front bar or the arms. Somfy builds the Orea RTS 550R2 for that job.
The Somfy Orea RTS 550R2 carries 50 Nm at 14 rpm on a star head, runs on 120V AC and takes its commands over RTS radio. Somfy publishes the reference as 1038174, order code 550R2 OREA RTS 50/14SJTW 10FT.
Orea cassette awnings and the motor inside the housing
Orea names the Somfy platform for cassette-integrated awnings and shading systems. The awning folds back into its own enclosure, so the motor sits in a tube the fabricator chose, behind hardware the fabricator supplied. Installers working these systems ask one question before anything else: does the motor fit the tube, and does the head mount to the plate already welded or bolted into the cassette.
The 550R2 answers the first half with a 1.85 in minimum tube inside diameter and a 1.77 in body. Anything narrower than 1.85 in will bind the motor against the tube wall. The second half depends on the bracket, and the star head gives you a known mounting pattern across the whole Somfy LT50 bracket range.
Retractable patio awnings, drop-arm window awnings and cassette screens all live in this torque class. A 50 Nm motor at 14 rpm moves a heavy projection awning with a full front bar and a wide fabric span. Smaller cassette units draw less.
Torque at 50 Nm and what it carries
Somfy sets the Orea 550R2 at the top of the LT50 ladder. The LT50 range runs 6 Nm through 50 Nm, and 50 Nm marks the ceiling before an installer steps up to LT60 and its 60 Nm through 100 Nm band. Awning fabric adds load as the projection grows, and the front bar adds a fixed weight the motor lifts on every retraction.
Torque picks the motor. Speed picks the experience. At 14 rpm the Orea 550R2 trades travel speed for pulling power, which suits a loaded awning better than a fast, light shade motor would. A 2.5 in tube at 14 rpm moves fabric at a measured pace and holds position without drift.
Somfy rates the limit switch unit at 250 turns. That number governs total travel, not torque, and 250 turns covers any cassette awning projection on the market.
Verified Somfy specifications
| Torque | 50 Nm |
| Speed | 14 rpm |
| Head type | Star |
| Minimum tube inside diameter | 1.85 in |
| Motor body external diameter | 1.77 in |
| Power supply | 120V AC, 60 Hz |
| Voltage range | 108 V to 132 V |
| Rated current | 1.1 A |
| Power in operation | 240 W |
| Standby power | 0 W |
| Limit switch capacity | 250 turns |
| Radio frequency | 433.420 MHz |
| Channels | 12 |
| Open field range | 656.2 ft |
| Coding | Rolling code, 16 million combinations |
| Noise level | 55 dB |
| Ingress protection | IP 44 |
| Working temperature | -4 °F to 158 °F |
| Thermal time | 4 minutes |
| Cable | SJTW, 3 conductor, white, 9.84 ft, removable |
| Insulation class | Class I |
| Warranty | 5 years |
Figures come from Somfy's published data for reference 1038174 on somfypro.com and somfysystems.com.
Tube fit, crowns, drives and brackets
Every LT50 motor needs a crown at the head end and a drive wheel that keys into the tube. The crown locates the motor inside the tube. The drive transmits rotation to the tube wall. Match both to the tube profile the cassette uses, not to the motor.
Two LT50 sets cover most cassette awning tubing. The Somfy Octagonal LT50 70mm Crown and Drive Set fits 70mm octagonal tube, the profile behind a large share of European-built awning frames. For round deep-section tube, the Somfy LT50 DS78MM Crown and Drive Set handles 78mm DS tube.
Measure the tube inside diameter before ordering either set. A caliper across the inside of the cut end settles it in seconds. Octagonal and round tube of the same nominal size take different hardware, and the drive has to seat without slop.
The star head needs a plate with the matching star cutout. Somfy's own accessory data for 1038174 names the Somfy LT50 Star Head Motor Bracket, rated to 50 Nm maximum. That rating lands on the Orea 550R2 exactly, with no headroom above it, so this bracket pairs with this motor and not with anything heavier.

Many cassette awnings arrive with the motor plate already built into the end casting, and in that case the cassette hardware takes over. Confirm the mounting pattern in the cassette against the star head before you cut anything. A retrofit into an open-roller awning uses the Somfy bracket instead.
RTS control and pairing
RTS puts the receiver inside the motor. No control wiring runs back from the motor to a switch, which is the reason awning installers reach for RTS on an exterior job. The 550R2 listens on 433.420 MHz, holds up to 12 channels and reaches 656.2 ft in open field.
Pair a handheld first and set the limits from it. The Somfy Situo 1 Channel RTS Pure Remote drives one awning on one channel and costs less than a multi-channel transmitter the job does not need. Add a second transmitter later and the motor accepts it through the standard RTS pairing sequence.
Somfy's TaHoma switch brings the same motor into app and voice control, and a wind sensor on the RTS network retracts the awning when gusts build. Both reach the 550R2 over the same radio.
Wiring, cable and install notes
The motor ships with a removable SJTW cable, 3 conductor, white, 9.84 ft long. Three conductors carry line, neutral and ground, since RTS needs no travelers. A licensed electrician brings 120V to the awning in conduit or in a weather-rated junction, and the removable cable lets you pull the motor later without cutting into the feed.
Somfy rates the motor IP 44 and sets a 4 minute thermal time. Four minutes of continuous run covers the full travel of any cassette awning several times over, and the thermal cutout protects the winding if a jam holds the motor against load. Working range runs from -4 °F to 158 °F, so the motor stays in service through a northern winter.
Set the limits with the awning arms under their own tension, not with the fabric slack. An awning that stops a turn short of full retraction leaves the front bar off its seals.
Questions about the Orea RTS 550R2
What tube does the Orea 550R2 fit?
Somfy publishes a 1.85 in minimum tube inside diameter for reference 1038174, with a 1.77 in motor body. Tube with a smaller inside diameter will not clear the body. Pair the motor with a crown and drive set matched to the tube profile, 70mm octagonal or 78mm DS being the common cassette awning choices.
How much weight will 50 Nm handle on an awning?
Torque at the tube, not fabric weight alone, decides the match. A 50 Nm motor at 14 rpm sits at the top of the Somfy LT50 range and drives large projection cassette awnings with a loaded front bar. Step up to the LT60 range for anything that calls for 60 Nm or more.
Does the Orea 550R2 need a separate RTS receiver?
No. The RTS receiver lives inside the motor head, which is why the cable carries three conductors and no control wires. Pair a Situo or Telis handheld direct to the motor, then add wall transmitters or a TaHoma switch to the same motor afterward.
Which bracket mounts a star head Orea motor?
Somfy names the LT50 Star Head Motor Bracket, reference 9410651, rated to 50 Nm maximum, in its accessory data for 1038174. Cassette awnings with an integrated motor plate use the cassette manufacturer's hardware, so check the end casting before ordering a bracket.
Order the Somfy Orea RTS 550R2 cassette awning motor with the crown and drive set your tube calls for, and add a Situo remote if the job has no transmitter on site. Measure the tube inside diameter first. That one number decides whether the rest of the order fits.
Shade Motors Direct is an authorized source for genuine Somfy motorized window shade, blind, and drapery parts.


